Upcoming training & events

17 - 18 Aug 2026

2 days, 8:30 AM - 4:30 PM

Mon 17 Aug 2026

1 day, 8:30 AM - 4:30 PM (8 hours)

This qualification is for those working in confined spaces either in a water or non-water environment. This unit is for anyone working in a low risk environment and includes preparing to enter and work safely, entering and exiting confined spaces safely, using equipment and tools, following procedures and dealing with emergencies.

17 - 18 Aug 2026

2 days, 8:30 AM - 4:30 PM

This course is for those who working in England who need to renew their existing Street Works card.

17 - 19 Aug 2026

3 days, 8:30 AM - 4:00 PM

This qualification is for those undertaking the role of a first aider in the workplace. The QNUK Level 3 Award in First Aid at Work (RQF) has been developed in conjunction with other AOs and supports employers to meet their requirements under the Health and Safety (First Aid) regulations 1981.

Tue 18 Aug 2026

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course is designed to give candidates the necessary theoretical and practical skills to enable them to safely assemble, dismantle and relocate low level access units without risk of personal injury to themselves and others.

Wed 19 Aug 2026

8:30 AM - 12:15 PM (3 hours 45 minutes)

Wed 19 Aug 2026

1 day, 8:30 AM - 4:30 PM (8 hours)

This qualification is intended for those that are undertaking the role of a fire marshal in a workplace. The qualification builds on the QNUK Level 1 Award in Fire Awareness at Work (RQF) and includes safe evacuation and personal emergency evacuation plans (PEEPS).

Thu 20 Aug 2026

9:30 AM - 10:15 AM (45 minutes)

This is a test only. Please keep your test score reports safe as we cannot re-print these.  If reprints are required please visit the CITB Website for further information.

24 - 25 Aug 2026

2 days, 8:30 AM - 4:00 PM

This course is suitable for learners wishing to progress to a qualification in the same subject area but at a higher level or requiring more specific knowledge, skills and understanding.

Mon 24 Aug 2026

1 day, 8:30 AM - 4:30 PM (8 hours)

This course aims to provide a sound understanding of the techniques used to carry out Signing, Lighting and Guarding duties on the Highway. It complies with the mandatory requirements of the New Roads and Street Works Act 1991.

Mon 24 Aug 2026

8:30 AM - 12:15 PM (3 hours 45 minutes)

Mon 24 Aug 2026

8:30 AM - 4:00 PM (7 hours 30 minutes)

This qualification is intended for those that are undertaking the role of a fire marshal in a workplace. The qualification builds on the QNUK Level 1 Award in Fire Awareness at Work (RQF) and includes safe evacuation and personal emergency evacuation plans (PEEPS).

Tue 25 Aug 2026

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course is suitable for competent managers, supervisors, safety professionals who are required to install, inspect and remove timber and steel excavation support systems.

Tue 25 Aug 2026

1 day, 8:30 AM - 4:30 PM (8 hours)

A refresher which is suitable for managers, supervisors, safety professionals and/or operatives who are required to oversee and/or carry out work employing install, inspect and remove timber, steel and proprietary excavation support systems.

Tue 25 Aug 2026

8:30 AM - 11:30 AM (3 hours)

This qualification is aimed at employees who work with ladders and/or stepladders at work.

Wed 26 Aug 2026

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course is suitable for competent managers, supervisors, safety professionals who are required to install, inspect and remove timber and steel excavation support systems.

Wed 26 Aug 2026

1 day, 8:30 AM - 4:30 PM (8 hours)

A refresher which is suitable for managers, supervisors, safety professionals and/or operatives who are required to oversee and/or carry out work employing install, inspect and remove timber, steel and proprietary excavation support systems.

26 - 27 Aug 2026

2 days, 8:30 AM - 4:00 PM

The Objectives of the Qualification are to: Prepare learners to progress to a qualification in the same subject area but at a higher level or requiring more specific knowledge, skills and understanding and prepare learners to progress to a qualification in another subject area.

Thu 27 Aug 2026

1 day, 8:15 AM - 4:30 PM (8 hours 15 minutes)

This qualification provides knowledge relating to Health and Safety in a Construction Environment. It is ideal for those individuals requiring a recognised qualification prior to completing the Health and Safety test for their CSCS (Construction Skills Certification Scheme) card. This qualification will prepare learners for entry to employment in the construction industry.

27 - 28 Aug 2026

2 days, 8:30 AM - 4:00 PM

This course is suitable for managers, supervisors, safety professionals who are required to install, inspect and remove timber and steel excavation support systems.

27 - 28 Aug 2026

1 day, 8:30 AM - 12:30 AM

This is suitable for managers, supervisors, safety professionals and/or operatives who are required to oversee and/or carry out work employing install, inspect and remove timber, steel and proprietary excavation support systems.

Thu 27 Aug 2026

8:30 AM - 4:00 PM (7 hours 30 minutes)

Thu 27 Aug 2026

2:15 PM - 3:00 PM (45 minutes)

This is a test only. Please keep your test score reports safe as we cannot re-print these.  If reprints are required please visit the CITB Website for further information.

31 Aug 2026 - 31 Aug 2027

53 weeks, 8:30 AM - 4:00 PM

1 - 2 Sep 2026

2 days, 8:30 AM - 4:30 PM

Tue 1 Sep 2026

1 day, 8:30 AM - 4:30 PM (8 hours)

This qualification is for those working in confined spaces either in a water or non-water environment. This unit is for anyone working in a low risk environment and includes preparing to enter and work safely, entering and exiting confined spaces safely, using equipment and tools, following procedures and dealing with emergencies.

1 - 2 Sep 2026

2 days, 8:30 AM - 4:30 PM

The CCNSG National course is a two day course for basic site safety designed to enable contractors to improve health, safety and environmental awareness. It will also benefit the employer by reducing accident rates and incident related costs and putting a stop to repetitive health and safety inductions.

1 - 3 Sep 2026

3 days, 8:30 AM - 4:30 PM

This qualification is for those undertaking the role of a first aider in the workplace. The QNUK Level 3 Award in First Aid at Work (RQF) has been developed in conjunction with other AOs and supports employers to meet their requirements under the Health and Safety (First Aid) regulations 1981.

Tue 1 Sep 2026

1 day, 8:30 AM - 4:30 PM (8 hours)

2 - 30 Sep 2026

5 weeks, Wed 8:30 AM - 4:00 PM

This course is suitable for project managers, site managers and supervisors, business proprietors and client-based personnel.

Wed 2 Sep 2026

1 day, 8:30 AM - 4:30 PM (8 hours)

This course is for those employed in carrying out work on the highway who have not worked on the highway before or require re-registration on the SWQR.

Wed 2 Sep 2026

1 day, 8:30 AM - 4:30 PM (8 hours)

This course aims to provide a sound understanding of the techniques used to carry out Signing, Lighting and Guarding duties on the Highway. It complies with the mandatory requirements of the New Roads and Street Works Act 1991.

3 - 4 Sep 2026

2 days, 8:30 AM - 4:00 PM

This course is suitable for mains and service layers requiring butt and electro fusion jointing skills using fully automatic machines.

Thu 3 Sep 2026

8:30 AM - 4:00 PM (7 hours 30 minutes)

For mains and service layers requiring butt fusion jointing skills using fully automatic machines.

Thu 3 Sep 2026

8:30 AM - 12:15 PM (3 hours 45 minutes)

This course is for any workers that have duties which may contaminate the air with dust, mist, vapour, gas or fumes such as: - Cutting wood or stone - Using a product containing volatile solvents - Handling a dusty powder&nbsp - Wearing stainless steel - Or where workers are exposed to low oxygen levels, such as confined spaces.

Thu 3 Sep 2026

2:30 PM - 4:00 PM (1 hour 30 minutes)

The training will be useful for first aiders/responders who may need to deal with life-threatening bleeds in sectors such as agriculture, forestry and construction.

Thu 3 Sep 2026

3:00 PM - 3:25 PM (25 minutes)

Qualitative Fit Testing (QLFT) is suitable for persons who must wear RPE with a tight-fitting facepiece (disposable and reusable half masks) to carry our work activities may result in harmful substances contaminating the air in the form of dust, mist, vapour, gas or fume.  Note: QLFT is not suitable for full-face masks.

Fri 4 Sep 2026

1 day, 8:30 AM - 4:30 PM (8 hours)

This unit is for anyone who works as part of a rescue and recovery team in confined spaces. It includes preparing to carry out emergency activities, entering and exiting confined spaces safely, using emergency equipment, casualty recovery and handling devices in accordance with manufacturers; specifications, rescuing and recovering casualties, following procedures and working safely.

Fri 4 Sep 2026

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course is suitable for mains and service layers requiring electro fusion jointing skills using fully automatic machines.

Fri 4 Sep 2026

8:30 AM - 12:15 PM (3 hours 45 minutes)

Mon 7 Sep 2026

8:30 AM - 4:00 PM (7 hours 30 minutes)

This unit is for anyone who works as part of a rescue and recovery team in confined spaces. It includes preparing to carry out emergency activities, entering and exiting confined spaces safely, using emergency equipment, casualty recovery and handling devices in accordance with manufacturers; specifications, rescuing and recovering casualties, following procedures and working safely.

7 - 9 Sep 2026

3 days, 8:30 AM - 4:00 PM

This unit is for the entry controller/top person who controls entry and arrangements for confined spaces without entering them. It includes the duties of an entry controller, pre-entry procedures, entry into and exit from the confined space, maintaining communications and initiating and controlling emergency procedures.

Mon 7 Sep 2026

1 day, 8:30 AM - 4:30 PM (8 hours)

This course is for those employed in carrying out work on the highway who have not worked on the highway before or require re-registration on the SWQR.

7 - 11 Sep 2026

1 week, 8:30 AM - 4:30 PM

This course is for those employed in carrying out works on the highway who have not worked on the highway before or require re-registration on the SWQR.

7 - 11 Sep 2026

1 week, 8:30 AM - 4:30 PM

This course is for those employed in monitoring works on the highway who have not worked on the highway before or require re-registration on the SWQR.

8 - 9 Sep 2026

2 days, 8:30 AM - 4:00 PM

Tue 8 Sep 2026

8:30 AM - 4:00 PM (7 hours 30 minutes)

This qualification is for those working in confined spaces either in a water or non-water environment. This unit is for anyone working in a low risk environment and includes preparing to enter and work safely, entering and exiting confined spaces safely, using equipment and tools, following procedures and dealing with emergencies.

Tue 8 Sep 2026

1 day, 8:30 AM - 4:30 PM (8 hours)

This course is for those employed in carrying out work on the highway who are required to locate underground apparatus.

Tue 8 Sep 2026

3:00 PM - 3:25 PM (25 minutes)

Qualitative Fit Testing (QLFT) is suitable for persons who must wear RPE with a tight-fitting facepiece (disposable and reusable half masks) to carry our work activities may result in harmful substances contaminating the air in the form of dust, mist, vapour, gas or fume.  Note: QLFT is not suitable for full-face masks.

Wed 9 Sep 2026

8:30 AM - 4:00 PM (7 hours 30 minutes)

The CCNSG Renewal Course is a 1 day course for basic site safety designed to enable contractors to improve health, safety and environmental awareness. It will also benefit the employer by reducing accident rates and incident related costs and putting a stop to repetitive health and safety inductions.

Wed 9 Sep 2026

8:30 AM - 12:15 PM (3 hours 45 minutes)

This course is for any workers that have duties which may contaminate the air with dust, mist, vapour, gas or fumes such as: - Cutting wood or stone - Using a product containing volatile solvents - Handling a dusty powder&nbsp - Wearing stainless steel - Or where workers are exposed to low oxygen levels, such as confined spaces.

10 - 11 Sep 2026

2 days, 8:30 AM - 4:00 PM

The course covers all relevant legislation and other aspects which affect safe working in the building, construction and civil engineering industries. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures, and adequate communication to sustain a health and safety culture among the workforce. The SSSTS course is endorsed by Builds UK and exceeds the standard set by CITB for construction supervisors training.

Thu 10 Sep 2026

8:30 AM - 12:15 PM (3 hours 45 minutes)

Thu 10 Sep 2026

1 day, 8:30 AM - 4:30 PM (8 hours)

This is the most popular first aid qualification. The Emergency First Aid at Work qualification (EFAW) is the choice of many employers to ensure they are meeting the requirements of the Health and Safety (first aid) Regulations 1981.

Thu 10 Sep 2026

2:30 PM - 4:00 PM (1 hour 30 minutes)

The training will be useful for first aiders/responders who may need to deal with life-threatening bleeds in sectors such as agriculture, forestry and construction.

Fri 11 Sep 2026

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course is suitable for all persons involved in the operational activities of the gas industry who require access to sites, both permanent and temporary, including all levels of operatives, supervisors and management.

14 - 15 Sep 2026

2 days, 8:30 AM - 4:30 PM

14 - 16 Sep 2026

3 days, 8:30 AM - 4:00 PM

14 - 15 Sep 2026

2 days, 8:30 AM - 4:00 PM

This course is suitable for learners wishing to progress to a qualification in the same subject area but at a higher level or requiring more specific knowledge, skills and understanding.

14 - 15 Sep 2026

2 days, 8:30 AM - 4:30 PM

This course is for those who working in England who need to renew their existing Street Works card.

14 - 18 Sep 2026

1 week, 8:30 AM - 4:00 PM

This Level 3 award in F- Gas is a regulated qualification designed for leaners working in the refrigeration, air conditioning and heat pumps industries. This qualification covers all F Gas activities (Category 1) and is essential for compliance with Regulation (EU) 2015/2067.

Tue 15 Sep 2026

8:15 AM - 4:00 PM (7 hours 45 minutes)

This qualification provides knowledge relating to Health and Safety in a Construction Environment. It is ideal for those individuals requiring a recognised qualification prior to completing the Health and Safety test for their CSCS (Construction Skills Certification Scheme) card. This qualification will prepare learners for entry to employment in the construction industry.

Tue 15 Sep 2026

8:30 AM - 4:00 PM (7 hours 30 minutes)

Tue 15 Sep 2026

2:15 PM - 3:00 PM (45 minutes)

This is a test only. Please keep your test score reports safe as we cannot re-print these.  If reprints are required please visit the CITB Website for further information.

16 - 17 Sep 2026

2 days, 8:30 AM - 4:00 PM

16 - 18 Sep 2026

3 days, 8:30 AM - 4:00 PM

This unit is for those working in a high risk environment and includes preparing to work safely, entering and exiting high risk confined spaces safely, using equipment and tools safely, following procedures and dealing with emergencies.

Wed 16 Sep 2026

8:30 AM - 4:00 PM (7 hours 30 minutes)

This qualification is for those working in confined spaces either in a water or non-water environment. This unit is for anyone working in a low risk environment and includes preparing to enter and work safely, entering and exiting confined spaces safely, using equipment and tools, following procedures and dealing with emergencies.

16 - 17 Sep 2026

2 days, 8:30 AM - 4:00 PM

The Objectives of the Qualification are to: Prepare learners to progress to a qualification in the same subject area but at a higher level or requiring more specific knowledge, skills and understanding and prepare learners to progress to a qualification in another subject area.

Wed 16 Sep 2026

1 day, 8:30 AM - 4:30 PM (8 hours)

This course aims to provide a sound understanding of the techniques used to carry out Signing, Lighting and Guarding duties on the Highway. It complies with the mandatory requirements of the New Roads and Street Works Act 1991.

Wed 16 Sep 2026

1 day, 8:30 AM - 4:30 PM (8 hours)

This qualification is for those at work that require an understanding of the hazards associated with manual handling and how these can best be avoided. The programme is typically delivered over a day. The assessment includes practical elements as well as the knowledge element found in the QNUK Level 2 Award in Principles of Manual Handling at Work.

Wed 16 Sep 2026

8:30 AM - 12:15 PM (3 hours 45 minutes)

Thu 17 Sep 2026

8:30 AM - 12:15 PM (3 hours 45 minutes)

This qualification is aimed at employees, or those looking to enter/re-enter the workforce who are using, or likely to use abrasive wheels. Suitable and sufficient health and safety training is a requirement in workplaces and this qualification enables learners to correctly identify, mount and use an abrasive wheel on a handheld or portable tool.

Thu 17 Sep 2026

12:45 PM - 3:45 PM (3 hours)

This course is designed to give candidates the skills and knowledge to choose, inspect, fit and safely use a harness.

Thu 17 Sep 2026

12:45 PM - 4:30 PM (3 hours 45 minutes)

This qualification is aimed at employees who work with ladders and/or stepladders at work.

Fri 18 Sep 2026

2:30 PM - 4:00 PM (1 hour 30 minutes)

The training will be useful for first aiders/responders who may need to deal with life-threatening bleeds in sectors such as agriculture, forestry and construction.

21 - 22 Sep 2026

2 days, 8:30 AM - 4:30 PM

21 - 22 Sep 2026

2 days, 8:30 AM - 4:00 PM

The CCNSG National course is a two day course for basic site safety designed to enable contractors to improve health, safety and environmental awareness. It will also benefit the employer by reducing accident rates and incident related costs and putting a stop to repetitive health and safety inductions.

21 - 24 Sep 2026

4 days, 8:30 AM - 4:00 PM

This course is ideal for electrotechnical professionals updating their skills or those pursuing continuous professional development, this course equips you with the knowledge and competence to confidently work in the solar PV sector. Please note: This qualification does not cover work at height or structural calculations, such as roof loading.

Tue 22 Sep 2026

1 day, 8:00 AM - 4:00 PM (8 hours)

This is suitable for anyone wishing to renew their SCO card.

Tue 22 Sep 2026

2:45 PM - 4:30 PM (1 hour 45 minutes)

Wed 23 Sep 2026

1 day, 8:30 AM - 4:30 PM (8 hours)

The CCNSG Renewal Course is a 1 day course for basic site safety designed to enable contractors to improve health, safety and environmental awareness. It will also benefit the employer by reducing accident rates and incident related costs and putting a stop to repetitive health and safety inductions.

Thu 24 Sep 2026

1 day, 8:30 AM - 4:30 PM (8 hours)

The CCNSG Leading a Team Safely course is designed for supervisors, team leaders and those with responsibility for others on industrial and engineering sites. When you’re leading people in higher-risk environments, technical skill alone isn’t enough — how you manage safety, behaviour and communication matters.

Fri 25 Sep 2026

8:30 AM - 2:30 PM (6 hours)

Fri 25 Sep 2026

8:30 AM - 12:15 PM (3 hours 45 minutes)

Fri 25 Sep 2026

1 day, 8:30 AM - 4:30 PM (8 hours)

This qualification is intended for those that are undertaking the role of a fire marshal in a workplace. The qualification builds on the QNUK Level 1 Award in Fire Awareness at Work (RQF) and includes safe evacuation and personal emergency evacuation plans (PEEPS).

28 - 29 Sep 2026

2 days, 8:30 AM - 4:30 PM

28 - 30 Sep 2026

3 days, 8:30 AM - 4:30 PM

This unit is for those working in a high risk environment and includes preparing to work safely, entering and exiting high risk confined spaces safely, using equipment and tools safely, following procedures and dealing with emergencies.

Mon 28 Sep 2026

1 day, 8:30 AM - 4:30 PM (8 hours)

This qualification is for those working in confined spaces either in a water or non-water environment. This unit is for anyone working in a low risk environment and includes preparing to enter and work safely, entering and exiting confined spaces safely, using equipment and tools, following procedures and dealing with emergencies.

Mon 28 Sep 2026

1 day, 8:30 AM - 4:30 PM (8 hours)

This qualification is for those at work that require an understanding of the hazards associated with manual handling and how these can best be avoided. The programme is typically delivered over a day. The assessment includes practical elements as well as the knowledge element found in the QNUK Level 2 Award in Principles of Manual Handling at Work.